服务热线:
400-879-1999
联系我们
服务热线
400-879-1999
电话:400-879-1999
地址:山东省莱州市206国道与308省道交叉口东南50米
当前位置:首页 > 中科聚峰产品 > 平口搅拌车 > 4方平口搅拌车
4方平口搅拌车
来源:http://www.cnzkjf.cn发布日期:2021-03-22   浏览量:
 
产品视频
启动前,应将搅拌操纵杆放在“空档”位置。
6、 Before starting, put the mixing control lever in the "neutral" position.
七、搞好文明施工,桶内多余材料不准随便乱倒。卸料后必须对搅拌筒、料槽、托辊等部位进行清洗。
7、 Do a good job in civilized construction, and do not dump the surplus materials in the barrel. After discharging, the mixing drum, material trough, idler and other parts must be cleaned.
八、启动前应对机械系统各部位认真进行检查,确认良好后方可启动。
8、 Before starting, all parts of the mechanical system should be carefully checked, and the machine can be started only after it is confirmed to be in good condition.
五、
3.5方平头搅拌车的液压马达是把液体的压力能转换为机械能的装置。 那液压马达有哪些特点呢?
The hydraulic motor of 3.5 square flat head mixer is a device that converts the pressure energy of liquid into mechanical energy. What are the characteristics of the hydraulic motor?
(1)液压泵在结构上需保证具有自吸能力,而液压马达就没有这一要求。
(1) The structure of the hydraulic pump needs to ensure that it has self-priming capacity, but the hydraulic motor does not have this requirement.
(2)叶片泵依靠叶片跟转子一起高速旋转而产生的离心力使叶片始终贴紧定子的内表面,起封油作用,形成工作容积。若将其当马达用,必须在液压马达的叶片根部装上弹簧,以保证叶片始终贴紧定子内表面,以便马达能正常起动。
(2) The vane pump relies on the centrifugal force generated by the high-speed rotation of the vane and the rotor, which makes the vane always close to the inner surface of the stator, plays the role of sealing oil, and forms the working volume. If it is used as a motor, a spring must be installed at the root of the blade of the hydraulic motor to ensure that the blade is always close to the inner surface of the stator, so that the motor can start normally.
(3)液压马达要求能在很宽的转速范围内正常工作,因此,应采用液动轴承或静压轴承。因为当马达速度很低时,若采用动压轴承,就不易形成润滑滑膜。
(3) Hydraulic motor is required to work normally in a wide speed range, so hydraulic bearing or hydrostatic bearing should be used. Because when the motor speed is very low, if the use of dynamic bearing, it is not easy to form lubricating film.
(4)为了减小吸油阻力,减小径向力,一般液压泵的吸油口比出油口的尺寸大。而液压马达低压腔的压力稍高于大气压力,所以没有上述要求。
(4) In order to reduce the suction resistance and radial force, the suction port of hydraulic pump is larger than the outlet port. The pressure of the low pressure chamber of the hydraulic motor is slightly higher than the atmospheric pressure, so there is no such requirement.
(5)液压马达一般需要正反转,所以在内部结构上应具有对称性,而液压泵一般是单方向旋转的,没有这一要求。
(5) The hydraulic motor generally needs forward and reverse rotation, so it should have symmetry in the internal structure, while the hydraulic pump generally rotates in one direction, so there is no such requirement.
(6)液压马达必须具有较大的起动扭矩。由于液压马达与液压泵具有上述不同的特点,使得很多类型的液压马达和液压泵不能互逆使用。
(6) The hydraulic motor must have a large starting torque. Due to the above different characteristics of hydraulic motor and hydraulic pump, many types of hydraulic motor and hydraulic pump can not be used in reverse.
六、选配
Optional
高压水泵冲洗车辆、自动润滑、电子秤、铲斗振动器、水泥料斗。
High pressure water pump washing vehicle, automatic lubrication, electronic scale, bucket vibrator, cement hopper.
搅拌和卸载
Mixing and unloading
双锥形滚筒拥有双螺旋形搅拌螺杆和中凸底部。
The biconical drum has a double spiral stirring screw and a convex bottom.
滚筒几何容量:.................... 5000L
Geometric capacity of drum: 5000L
滚筒旋转速度:..................20转/分钟.
Drum rotation speed: 20 rpm
混凝土产量:.................3.2立方米/罐
Concrete output: 3.2m3/can
“重型”球形鞍座上安装的反力架可以180°液压旋转,并且通过液压式制动器自动锁止。滚旋转通过柱塞泵和闭路中的柱塞液压马达实现,在操作室内和搅拌机后部拥有手动电气阀。
The reaction frame installed on the "heavy" spherical saddle can rotate 180 ° hydraulically and lock automatically by hydraulic brake. The rotation of the drum is realized by the plunger pump and the plunger hydraulic motor in the closed circuit. There are manual electric valves in the operation room and at the rear of the mixer.
可拆卸溜槽可以保证直接通过料斗卸载。作为标准配置提供1个溜槽延长部件。
The detachable chute can ensure direct unloading through the hopper. A chute extension is provided as standard.
设备液压系统
Equipment hydraulic system
齿轮泵:双联齿轮泵
Gear pump: double gear pump
最大流量:.................... 90升/分钟。
Maximum flow rate: 90 L / min.
最大压力:........................ 27.5MPa兆帕,
Maximum pressure: 27.5mpa, MPa,
马达:品牌/ 美国桑尼
Motor: brand / Sonny
3件手柄多功能操纵杆。
Three handle multi-function control lever.
铝质热交换器,用于冷却液压油。
Aluminum heat exchanger for cooling hydraulic oil.
半闭式进油,可以从外部更换液压油过滤器。
Semi closed oil inlet, hydraulic oil filter can be changed from outside.
装载
load
装载臂配置自动称量感应仪,双作用装载装置举升和复位油缸,手动控制的进料口拥有标准的提示功能。
The loading arm is equipped with automatic weighing sensor, double acting loading device, lifting and reset oil cylinder, and the manually controlled feeding port has standard prompt function.
容量:.............................. 700升
Capacity: 700 liters
每次装满需要的装载次数:.......... 大约5次
Loading times required for each filling:...... about 5 times
操作室
Operation room
封闭的操作室拥有制热/冷系统,倾斜式前窗。
The enclosed operating room has heating / cooling system and inclined front window.
人性化座椅,配置柔性悬架和高度调整功能,配电子称重、行车影像。
Humanized seat, equipped with flexible suspension and height adjustment function, with electronic weighing and driving image.
维护加注量
Maintenance filling quantity
燃油箱: ............................. 75升
Fuel tank: 75 L
液压系统总容量:........................ 75升
Total capacity of hydraulic system: 75 L
机油:........................... 16升
Oil: 16L
重量
weight
操作重量:......................8050千克
Operating weight: 8050kg
最大总重量:....................15250千克
Maximum total weight: 15250kg
最大载重量:.....................8400千克
Maximum load capacity: 8400kg
尺寸
size
长×宽×高:....................7730×2700×3260 mm
Length × width × height: 7730 × 2700 × 3260 mm
  • 上一篇:1.2平口搅拌车
  • 下一篇:5.5方平口搅拌车
  • 相关产品
    3.5平口搅拌车

    3.5平口搅拌车

    2.6方平口搅拌车

    2.6方平口搅拌车

    1.8方平口搅拌车

    1.8方平口搅拌车

    2方平口搅拌车

    2方平口搅拌车

    莱州中科聚峰机械有限公司
    电话:15098551508 地址:山东省莱州市206国道与308省道交叉口东南50米
    聚峰机械专注生产销售自动搅拌车、自动搅拌机,厂家直销,型号齐全,经久耐用,质优价廉;以规范的管理为依托,以专业的技术为支持,安全可靠,让您放心选择!