High temperature environment has great harm to self feeding mixer. How to avoid high temperature harm? The following four points are summarized

1、防止车漆受损：车漆经过强烈的阳光曝晒，很容易出现发旧、起皱的情况，而普通的美容打蜡虽然可以起到一定的防晒效果，但由于任何车蜡都含有矽的成分，紫外线照射时间长了会锈蚀车漆，留下点点黑斑。车蜡本身起不到增强硬度、抗紫外线的作用，反而会因温度过高而很快流失，停车时要注意尽量把车停放在阴凉处。

1. Prevent damage to car paint: car paint after strong sunlight exposure, it is easy to appear old, wrinkled situation, and ordinary beauty waxing although can play a certain sunscreen effect, but because any car wax contains silicon components, UV irradiation for a long time will rust car paint, leaving a little black spots. The car wax itself can not enhance the hardness and anti ultraviolet effect, but it will be quickly lost due to the high temperature. When parking, pay attention to park the car in a cool place as far as possible.

2、防止发动机机体过热：由于环境温度比较高，因此发动机很容易过热，要加强对发动机冷却系统的检查、保养，这包括节温器、水箱、水泵、风扇等部件的检查，并且要注意及时加注冷却水。当水温超过100℃时，应在阴凉处停车降温，让发动机怠速运转，并掀开发动机罩帮助散热。

2. To prevent the engine body from overheating: due to the high ambient temperature, the engine is easy to overheat. It is necessary to strengthen the inspection and maintenance of the engine cooling system, including the inspection of thermostat, water tank, water pump, fan and other components, and pay attention to the timely filling of cooling water. When the water temperature exceeds 100 ℃, stop in the shade to cool down, let the engine idle, and lift the hood to help heat dissipation.

3、防止刹车制动失灵：制动液在高温环境中很容易发生蒸发汽化，在制动管路中形成气阻，制动蹄片也容易烧蚀，造成制动失灵。所以要经常检查调整制动系统，下长坡途中应注意停车晾刹，保证制动性能的良好。如果发现制动毂发烫，应停车降温，但不可浇泼冷水，以防制动毂破裂。

3. Prevent the brake failure: the brake fluid is easy to vaporize in the high temperature environment, forming air resistance in the brake pipeline, and the brake shoes are easy to be ablated, resulting in brake failure. Therefore, the braking system should be checked and adjusted frequently, and attention should be paid to parking and air braking on the way down the long slope to ensure good braking performance. If it is found that the brake hub is hot, stop the vehicle to cool down, but do not pour cold water to prevent the brake hub from cracking.

4、防止车胎爆裂：气温高的时候比较容易爆胎，温度过高时很容易使轮胎变形，抗拉力下降。而作为轮胎本身，气压不标准、性能减弱、轮胎老化，或者在行驶过程中轮胎轧到了坚硬的金属或其他硬物等情况，都会导致汽车突然间爆胎。

4. Prevent tire burst: when the temperature is high, it is easy to burst the tire. When the temperature is too high, it is easy to deform the tire and reduce the tensile strength. As the tire itself, non-standard air pressure, poor performance, tire aging, or hard metal or other hard objects rolled by the tire in the process of driving will lead to sudden tire burst.

以上就就是小编为大家介绍关于自上料搅拌机的相关内容，希望可以帮助到大家，更多精彩内容请大家直接关注：http://www.cnzkjf.cn会有精彩内容呈现。

The above is Xiaobian's introduction about self feeding mixer. I hope it can help you. Please pay attention to more wonderful contents http://www.cnzkjf.cn There will be wonderful content.