As we all know, different automatic concrete mixer equipment will make different sounds after operation. The design scheme and model selection of mixing equipment are fully integrated with the overall goal of mixing work. All kinds of different mixing processes need to be completed by different mixing equipment.

在设计方案型号选择时要根据加工工艺对搅拌工作的总体目标跟要求，分辨搅拌机形式、电想法输出功率、搅拌速率，然后选择减速器、声卡机架、搅拌轴、水泵密封等各构件。有的声音较为小，类似嗡鸣音；而有的声音则十分的大，在总面积十分大的工厂中，隔得太远也很有可能搞清楚的听见。那麼对搅拌机设备而言，它的声音的尺寸是不是就代表着质量的优劣呢？

In the selection of design scheme and model, the mixer form, electrical output power and mixing rate shall be distinguished according to the overall objectives and requirements of the processing technology for mixing work, and then the components such as reducer, sound card frame, mixing shaft and water pump seal shall be selected. Some sounds are relatively small, similar to buzzing; And some voices are very loud. In factories with a very large total area, it is possible to hear them clearly if they are too far apart. So for mixer equipment, does its sound size represent the quality?

严苛含意上而言，进一步搅拌车的声音跟质量并不立即的关系，只是跟它的转速比也有输出功率有关系。由于有的工厂中运用的大中型搅拌机，它需要推动的输出功率是十分大的，那样在插电当今传动轴转速比十分快，侧入式搅拌机生产商飞快地推动了叶片搅拌物件，便会有声响。

In a strict sense, the sound of the further mixer is not immediately related to the quality, but also related to its speed ratio and output power. Due to the large and medium-sized mixers used in some factories, the output power that needs to be pushed is very large. In that way, when the power is plugged in, the speed ratio of the transmission shaft is very fast, and the side entry mixer manufacturer pushes the blade to stir the objects quickly, there will be a sound.

而有的搅拌机往往不声音，是由于它的搅拌物件较为轻，转速比较慢。但在选购搅拌机的情况下，或是很有可能根据声音这一项来分辨搅拌机的，但并不是听声音的尺寸，只是需看叶片在运作的情况下是不是会出现杂声。

Some mixers often don't sound because their mixing objects are relatively light and the speed is relatively slow. However, in the case of purchasing a mixer, or it is likely to distinguish the mixer according to the sound, but it is not to listen to the size of the sound, but to see whether there will be noise when the blade is in operation.