Since the concrete will solidify into hard blocks in a short time and have a certain corrosivity to the steel and paint of the concrete forced mixer, cleaning the concrete adhered to the concrete storage tank and the inlet and outlet after each use of the concrete forced mixer storage tank is a daily maintenance work that needs to be carried out carefully. These include:

1．每次装料前用水冲洗进料口，使进料口在装料时保持湿润；

1. Wash the inlet with water before loading each time to keep the inlet moist during loading;

2．在装料的同时向随混凝土强制搅拌机自带的清洗用水水箱中注满水；

2. Fill the cleaning water tank provided with the concrete forced mixer with water while loading;

3．装料后冲洗进料口，洗净进料口附近残留的混凝土；

3. After loading, wash the inlet and clean the residual concrete near the inlet;

4．到工地卸料后，冲洗出料槽，然后向混凝土贮罐内加清洗用水30—40 L；在混凝土强制搅拌机回程时保持混凝土贮罐正向慢速转动；

4. After unloading at the construction site, wash the discharge tank, and then add 30-40 l of cleaning water to the concrete storage tank; Keep the concrete storage tank rotating forward and slowly when the concrete forced mixer returns;

5．下次装料前切记放掉混凝土贮罐内的污水；

5. Remember to drain the sewage in the concrete storage tank before the next loading;

6．每天收工时完全清洗混凝土贮罐及进出料口周围，保证不粘有水泥及混凝土结块。

6. At the end of each day, completely clean the concrete storage tank and around the inlet and outlet to ensure that there is no cement and concrete caking.

以上就是为大家介绍的有关小型混凝土自动搅拌车的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.cnzkjf.cn

The above is a detailed introduction to the small automatic concrete mixer. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.cnzkjf.cn