服务热线:
400-879-1999
栏目导航
联系我们
服务热线
400-879-1999
电话:400-879-1999
地址:山东省莱州市206国道与308省道交叉口东南50米
当前位置:首页 > 搅拌车资讯 > 新闻资讯中科聚峰自上料搅拌车的筒体直径怎么选择?
中科聚峰自上料搅拌车的筒体直径怎么选择?
来源:http://www.cnzkjf.cn发布日期:2020-03-05   浏览量:0
 
  筒体直径必须考虑,桶倾斜角度的大小,这也是重要的一个参数,因为倾角决定桶重量中心的位置,从而影响整个汽车的,如果是不合理的,那么容易发生翻转。如果倾斜角过大,且管径未相对减小,则容易发生侧翻。
  The diameter of the barrel must be considered, and the inclination angle of the barrel, which is also the most important parameter, because the inclination angle determines the position of the weight center of the barrel, thus affecting the center of gravity of the whole car. If the center of gravity is unreasonable, it is easy to overturn. If the inclination angle is too large and the pipe diameter is not relatively reduced, it is easy to roll over.
  我们需要看看中科聚峰自上料搅拌车使用的地段。不同的部分还需要配备不同的混合罐。与平坦的地形,水箱容量相对较大,气缸的直径可以相对较大,而对于坦克和复杂的地形,气缸的直径应相对较小,使自动喂食机更稳定,完全保证驾驶员的,提高对环境的适应能力。
中科聚峰自上料搅拌车
  We need to take a look at the area where Zhongke Jufeng self loading mixer is used. Different parts also need to be equipped with different mixing tanks. Compared with flat terrain, the capacity of water tank is relatively large, and the diameter of cylinder can be relatively large. For tanks and complex terrain, the diameter of cylinder should be relatively small, making the automatic feeder more stable, fully ensuring the safety of the driver, and improving the adaptability to the environment.
  中科聚峰自上料搅拌车是由一系列精密的系统组成。所以,每一个环节都是相互制约,相互配合,完成混合器的正常运行。因此,我们要看底盘的配置,主要看底盘的功率、外形尺寸、头部质量等一系列参数,这些参数类似于人的身体,而搅拌罐类似于人的衣服。
  Zhongkejufeng self loading mixer is composed of a series of precise systems. Therefore, each link restricts and cooperates with each other to complete the normal operation of the mixer. Therefore, we need to see the configuration of the chassis, mainly a series of parameters such as the power, overall dimension and head mass of the chassis. These parameters are similar to the human body, while the mixing tank is similar to the human clothes.
 

莱州中科聚峰机械有限公司 电话:15053524111 地址:山东省莱州市206国道与308省道交叉口东南50米