With the continuous development of the construction industry, the demand for concrete is increasing day by day. The quotation of concrete mixer truck requires higher and higher quality of concrete. The traditional concrete construction method of small concrete mixer can not meet the needs. In the modern construction, a large number of application of ready mixed concrete and the promotion of concrete mixer truck, which one is better, has changed the traditional construction process and the transportation and pouring methods. Therefore, a large number of concrete mixer trucks are required to meet the status quo. The concrete mixer truck is a construction mechanization product with more and more customers.

混凝土搅拌车是各种建筑工地的理想搅拌设备，相对于架桥机，起重机来说，混凝土搅拌车的维修保养相对是比较容易的，但是也不容小觑，或许一个小小的细节就会直接影响混凝土搅拌车的使用。

The concrete mixer is an ideal mixing equipment for various construction sites. Compared with the bridge erecting machine and crane, the maintenance of the concrete mixer truck is relatively easy, but it should not be underestimated. Perhaps a small detail will directly affect the use of the concrete mixer.

下面我们就来说说，导致混凝土搅拌机轴端漏浆的因素有哪些呢？混凝土的质量是工程建设的根本所在。搅拌机润滑系统中手动泵和自动泵油杯中无润滑。

Let's talk about the following, which factors lead to the leakage of concrete mixer shaft end? The quality of concrete is the foundation of engineering construction. There is no lubrication in the oil cup of manual pump and automatic pump in the lubrication system of mixer.

清理液压混凝土搅拌罐残留物的好办法：搅拌罐内地混凝土残留物，可以先用石子磨一下。根据混凝土搅拌罐容量计量一定数量的石子（例如2m几组计2吨石子），转一会，混凝土搅拌车，使一些强度比较低的混凝土快先磨下来。然后进人用铁钎、钢锤来清理。要注意清理的时间，一般清一次或者每班清一次。时间长强度上来后就很费劲了，因此要及时的进理，同时也能够更好的保护设备的正常运行。

A good way to clean up the residue of the hydraulic concrete mixing tank: the concrete residue in the mixing tank can be ground with stones first. According to the capacity of the concrete mixing tank, measure a certain number of stones (for example, 2 tons of stones in several groups of 2m). After a while, the concrete mixer truck will grind down some concrete with low strength. Then, people use iron drill rod and steel hammer to clean it. Pay attention to the cleaning time, generally once a day or once per shift. After a long time, the intensity is very hard, so we should make timely progress, and at the same time, we can better protect the normal operation of the equipment.